Operating electrical acces-
sories
You can start using electrical ac-
cessories connected to an on-
board socket only when the ig-
nition is switched on. If you sub-
sequently switch off the ignition
the sockets are also switched off
if the power drain caused by their
electrical consumers is high. If
the power drain is low the sock-
ets remain operational for a cer-
tain period of time before being
switched off.
Cable routing
The cables from the onboard
sockets to the auxiliary devices
must be routed in such a way
that they:
Do not impede the rider
Do not restrict the steering an-
gle and the driving characteris-
tics
Cannot be trapped
Navigation device
with navigation system
OA
Installing navigation
device
Switch on ignition.
Press button 1 to open the slot
for the navigation device.
Slot cover pops open, wind-
screen moves to top limit posi-
tion.
Pull slot cover up as far as it
will go.
From behind, push out cap 2.
Operate latch 3 and remove
cover 4.
Initially insert the navigation de-
vice into mount 5, then press it
into latching mechanism 6.
7
99
z
Accessories
To Next Page
Loading...
Need help?
General
