BMW K 1600 GTL User Manual

Engine
Engine design transverse straight-six four-stroke engine with four
valves per cylinder and two overhead camshafts;
liquid cooling, electronic fuel injection, integral six-
speed cassette gearbox, dry-sump lubrication.
Displacement 1649 cc (1649 cm
3
)
Cylinder bore 2.8 in (72 mm)
Piston stroke 2.7 in (67.5 mm)
Compression ratio 12,2:1
Rated output 160 hp (118 kW), at engine speed: 7750 min
-1
with power reduction
OE
107 hp (79 kW), at engine speed: 7750 min
-1
Torque 129 lb/ft (175 Nm), at engine speed: 5250 min
-1
with power reduction
OE
111 lb/ft (150 Nm), at engine speed: 4750 min
-1
Maximum engine speed max 8500 min
-1
Idle speed 900
±50
min
-1
, Engine at operating temperature
10
142
z Technical data

BMW K 1600 GTL Specifications

General

Displacement	1, 649 cc
Transmission	6-speed
Final Drive	Shaft drive
ABS	Standard
Max Power	160 hp at 7, 750 rpm
Max Torque	175 Nm at 5, 250 rpm
Fuel Capacity	26.5 liters
Seat Height	750 mm
Front Suspension	BMW Motorrad Duolever
Rear Suspension	BMW Motorrad Paralever; central spring strut
Front Brake	Double disc brake, diameter 320 mm, 4-piston fixed calipers
Rear Brake	Single disc brake, diameter 320 mm, 2-piston fixed caliper
Engine Type	Oil/water-cooled 4-stroke in-line six-cylinder engine