Care products
BMW Motorrad recommends
that you use cleaning and
care products available at your
authorized BMW Motorrad
retailer. BMW CareProducts
have been materials tested,
laboratory tested, and field tested
and provide optimum care and
protection for the materials used
in your motorcycle.
The use of unsuitable
cleaning and care products
can damage motorcycle
components.
For cleaning, do not use any sol-
vents such as nitro-thinners, cold
cleaning agents, fuel or similar,
and do not use cleaning agents
that contain alcohol.
Washing your
motorcycle
BMW Motorrad recommends
that you use BMW Insect Re-
mover to soften and wash off
insects and stubborn dirt from
painted parts before washing the
motorcycle.
To prevent stains, do not wash
the motorcycle immediately after
it has been exposed to bright
sunlight and do not wash it in the
sun.
Make sure that the motorcycle
is washed frequently, especially
during the winter months.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
After washing the motor-
cycle, after driving through
water or in the rain, braking can
be delayed due to damp brake
disks and brake pads.
Brake early until the brake disks
and pads are dry or braked until
dry.
Warm water intensifies the
effect of salt.
Only use cold water to remove
road salt.
The high water pressure
of high-pressure cleaners
(steam cleaners) can damage
seals, the hydraulic brake sys-
tem, the electrical system and
the seat.
Do not use a steam jet or high-
pressure cleaning equipment.
Cleaning sensitive
vehicle parts
Plastics
If plastic parts are cleaned
using unsuitable cleaning
agents, the surfaces can be dam-
aged.
Do not use cleaning agents that
9
136
z
Care
To Next Page
Loading...
Need help?
General
