Travel times: Travel
times
Date: Current date
Oil level: Engine-oil level
Off: No reading
Resetting average data
Call up the Info menu and
select the average value you
want to reset.
Push the Multi-Controller to
the right and hold it in this po-
sition until the average value is
reset.
Operating stopwatch
Call up the Info menu and
select Stopwatch.
With the stopwatch stopped,
push the Multi-Controller 1 to
the right to start the stopwatch.
The stopwatch continues tim-
ing even if you select some
other reading or switch off the
ignition.
With the stopwatch running,
push Multi-Controller 1 to the
right to stop the stopwatch.
Push Multi-Controller 1 to the
right and hold it in this position
to reset the stopwatch.
Measuring travel times
Call up the Info menu and
select Travel times.
Push the Multi-Controller 1 to
the right and hold it in this po-
sition to reset the travel time.
Timing continues even if you
select some other reading or
switch off the ignition.
Time during which the mo-
torcycle was on the move
since the last reset.
Time during which the mo-
torcycle was at a standstill
since the last reset.
4
49
z
Operation
To Next Page
Loading...
Need help?
General
