contain alcohol, solvents or abra-
sives to clean plastic parts.
'Fly sponges' or sponges with
hard surfaces can also lead to
scratches.
Fairings
Clean body panels with water
and BMW plastic care emulsion.
Windscreens and headlight
lenses made of plastic
Clean off dirt and insects with a
soft sponge and plenty of water.
Soften stubborn dirt and
dead insects by covering
the affected areas with a wet
cloth.
Chrome
Especially in the case of road
salt, carefully clean chrome parts
with plenty of water and BMW
auto shampoo. Use chrome pol-
ish for additional treatment.
Radiator
Clean the radiator regularly to
prevent overheating of the en-
gine due to inadequate cooling.
For example, use a garden hose
with low water pressure.
Cooling fins can be bent
easily.
When cleaning the radiator, en-
sure that the fins are not bent.
Rubber
Treat rubber components with
water or BMW rubber protection
coating agent.
Using silicone sprays for
the care of rubber seals can
cause damage.
Do not use silicon sprays or
other care products that contain
silicon.
Paint care
Washing the motorcycle regularly
will help counteract the long-term
effects of substances that dam-
age the paint, especially if your
motorcycle is ridden in areas
with high air pollution or natural
sources of dirt, e.g. tree resin or
pollen.
However, remove particularly ag-
gressive materials immediately;
otherwise changes in the paint or
discoloration can occur. These
include spilled fuel, oil, grease,
brake fluid as well as bird drop-
pings. BMW Car Polish or BMW
Paint Cleaner are recommended
for this.
Contamination of the paint finish
is particularly easy to see after
the motorcycle has been washed.
Remove this type of soiling with
cleaning naphtha or spirit on a
clean cloth or cotton ball. BMW
Motorrad recommends remov-
ing tar spots with BMW Tar Re-
9
137
z
Care
To Next Page
Need help?
General
