be switched back to the first
level.
2 Switch in middle position:
Heating off.
3 Switch in one-dot position:
50 % heating output.
4 Switch in two-dot position:
100 % heating output.
Symbol 5 appears on the display,
indicating that the rear seat heat-
ing is ON.
If this warning symbol ap-
pears it tells you that the
on-board system voltage is low.
If applicable, the seat heating
might have been temporarily
switched off.
Dynamic Traction
Control (DTC)
with Dynamic Traction Control
(DTC)
OE
Switching DTC off and on
Switch on ignition.
Call up the Settings menu
and select DTC.
This menu cannot be called
up while the motorcycle is
on the move.
Select Off (once) to
switch DTC off once, in other
words until the ignition is next
switched on.
The DTC warning light
shows to indicate that DTC
has been switched off.
Select On to switch on DTC.
Alternatively: Switch the igni-
tion off and then on.
DTC warning light goes
out; if self-diagnosis has not
completed the DTC warning light
starts flashing.
4
56
z
Operation
To Next Page
Loading...
Need help?
General
