al' warning light cannot be dis-
played.
Check that the 'General' warning
light comes on, and that it shows
red and yellow.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The self-diagnosis routine is de-
termining whether the BMW
Motorrad Integral ABS is ready
for operation. The self-diagno-
sis routine launches automatically
when you switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while vehicle is parked.
ABS warning light flashes.
Phase 2
Checking wheel sensors while
starting off. The motorcycle
must reach a speed of at least
3 mph (5 km/h) before the ABS
self-diagnosis routine can be
completed.
ABS warning light flashes.
ABS self-diagnosis
completed
The ABS warning lamp goes
out.
If an ABS error is indicated fol-
lowing completion of the ABS
self-diagnosis routine:
It remains possible to con-
tinue riding. Bear in mind that
neither the ABS function nor
the integral braking function is
available.
Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
DTC self-diagnosis
with Dynamic Traction Control
(DTC)
OE
The readiness for operation
of the BMW Motorrad DTC is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch on
the ignition.
Phase 1
Checking the diagnosable
system components while
stopped.
DTC warning light flashes
slowly.
Phase 2
Checking the diagnosable
system components while
driving. The engine must be
running and the motorcycle
must reach a speed of at
5
81
z
Riding
To Next Page
Loading...
Need help?
General
