BMW K1600GTL User Manual

General instructions
The Maintenance chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
work in the Repair Manual on
DVD for your vehicle, which is
available from your authorised
BMW Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.
Toolkit
Standard toolkit
1 Screwdriver handle
2 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Adjust the damping for
rear wheel ( 79).
3 Torx wrench, T25/T30
T25 on short end, T30 on
long end
Replacing bulb for
high-beam headlight
( 148).
3 Adjust the shift lever
( 78).
Removing number-plate
carrier.
Engine oil
Checking engine oil level
WARNING
Engine-oil level too low.
Risk of accident due to the en-
gine seizing.
Always make sure that the oil
level is correct.
ATTENTION
The oil level varies with the
temperature of the oil. The
higher the temperature, the
higher the level of oil in the
sump.
Misinterpretation of the oil level
Check the oil level only
after a lengthy ride or when
8
130
z Maintenance

BMW K1600GTL Specifications

General

Displacement	1649 cc
ABS	Standard
Traction Control	Standard
Suspension Front	BMW Motorrad Duolever
Suspension Rear	BMW Motorrad Paralever
Tires Front	120/70 ZR 17
Tires Rear	190/55 ZR 17
Engine Type	Oil/water-cooled, six-cylinder, four-stroke, in-line engine
Power	118 kW (160 hp) at 7, 750 rpm
Torque	175 Nm at 5250 rpm
Transmission	6-speed
Fuel Capacity	26.5 liters
Seat Height	750 mm
Brakes Front	Dual 320 mm discs, 4-piston calipers
Brakes Rear	Single 320 mm disc, 2-piston caliper
Weight	358 kg (unladen weight, road ready, fully fueled)