BMW K1600GTL User Manual

Standard BMW service
A standard BMW service con-
sists of the following mainten-
ance work:
Perform vehicle test with the
BMW Motorrad diagnosis sys-
tem.
Drain the oil condensate hose.
Visually inspect the brake
pipes, brake hoses and
connections.
Check the front and rear brake-
fluid levels.
Check the front and rear brake
pads and brake discs for wear.
Check the clutch system.
Check the coolant level.
Check the tyre pressures and
tread depth.
Check the ease of movement
of the side stand.
Check the ease of movement
of the centre stand.
Check the lights and signalling
equipment.
Check that the engine start
suppression system is in work-
ing order.
Perform final inspection and
check of roadworthiness.
Set the service-due date and
service countdown distance.
Check the battery charge state.
Confirm BMW service in the
on-board documentation.
11
180
z Service

BMW K1600GTL Specifications

General

Displacement	1649 cc
ABS	Standard
Traction Control	Standard
Suspension Front	BMW Motorrad Duolever
Suspension Rear	BMW Motorrad Paralever
Tires Front	120/70 ZR 17
Tires Rear	190/55 ZR 17
Engine Type	Oil/water-cooled, six-cylinder, four-stroke, in-line engine
Power	118 kW (160 hp) at 7, 750 rpm
Torque	175 Nm at 5250 rpm
Transmission	6-speed
Fuel Capacity	26.5 liters
Seat Height	750 mm
Brakes Front	Dual 320 mm discs, 4-piston calipers
Brakes Rear	Single 320 mm disc, 2-piston caliper
Weight	358 kg (unladen weight, road ready, fully fueled)