not possible to ensure fault-
free communications in every
situation.
Possible sources of
interference:
interference zones due to
transmission masts and similar.
devices with non-compliant
Bluetooth implementations.
proximity of other Bluetooth-
compatible devices.
Pairing
Two Bluetooth devices have to
recognise each other before they
can communicate. This process
of mutual recognition is known
as pairing. When two devices
have paired they remember each
other, so the pairing process is
conducted only once, on initial
contact.
NOTICE
On some mobile devices, e.g.
those with iOS operating sys-
tems, the BMW Motorrad Con-
nected App must be opened be-
fore use.
During the pairing process, the
TFT display searches for other
Bluetooth-compatible devices
within its reception range. The
conditions that have to be satis-
fied before the audio system can
recognise another device are as
follows:
The device's Bluetooth func-
tion must be active
The device must be "visible" to
others
The device must support the
A2DP profile
Other Bluetooth-compatible
devices must be OFF (e.g.
mobile phones and navigation
systems).
Please consult the operating in-
structions for your communica-
tion system.
Pairing
Call up the Settings, Con-
nections menu.
Bluetooth connections can
be established, managed and
deleted in the CONNECTIONS
menu. The following Bluetooth
connections are displayed:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mobile
devices is displayed.
Connect mobile device
Pairing ( 109).
Activate the mobile device's
Bluetooth function (see mobile
device's operating instructions).
5
109
z
TFT display
To Next Page
Loading...
Need help?
General
