EasyManuals Logo

BMW Z4 sDrive28i User Manual

BMW Z4 sDrive28i
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
Display in the instrument cluster
1. Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompanied
by the word "OIL".
2. Press button 2 in the turn indicator lever.
The oil level is checked and the reading dis‐
played.
Possible displays
Too much engine oil
Have the vehicle checked immediately;
otherwise, surplus oil can lead to engine dam‐
age.◀
1 Oil level OK
2 Oil level is being checked. This can take
about 3 minutes if the car is at a standstill on
a level surface, or about 5 minutes while the
car is on the move.
3 Oil level at minimum: add engine oil as soon
as possible, but no more than 1 US quart/
1 liter.
4 Oil level is too high.
5 The oil level sensor is defective. Do not add
engine oil. It is possible to continue driving.
Note the newly calculated remaining mile‐
age until the next oil service. Have the sys‐
tem checked as soon as possible.
Adding engine oil
Seite 165
Engine compartment Mobility
165
Online Edition for Part no. 01 40 2 609 184 - 09 11 500

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW Z4 sDrive28i and is the answer not in the manual?

BMW Z4 sDrive28i Specifications

General IconGeneral
BrandBMW
ModelZ4 sDrive28i
CategoryAutomobile
LanguageEnglish

Related product manuals