1 Button for:
▷ Selecting the display
▷ Setting values
2 Button for:
▷ Confirming selected display or set val‐
ues
▷ Calling up computer information 62
3 With the lights switched on: dimming the in‐
strument lighting 71
4 Calling up Check Control 66
5 Checking the engine oil level 164
6 Initializing the Flat Tire Monitor 76
Resetting the Tire Pressure Monitor 77.
7 Setting the time 64
8 Setting the date 65
9 Viewing service requirement display 65
10 Setting formats and units of measure, re‐
setting to factory settings 63
11 Changing settings
▷ Confirmation signals when locking and
unlocking the vehicle 24
▷ Response during unlocking proce‐
dure 22
▷ Automatic locking 26
▷ Headlamp courtesy delay feature 68
▷ Daytime running lights 69
▷ Triple turn signal activation 50
▷ Seat memory 39
Exiting displays
The external temperature reading and the time
reappear when you press button 2 or if you make
no entries within approx. 15 seconds. If required,
complete the current setting first.
Formats and units of measure
You can set formats and units of measure.
1. Switch on the ignition, refer to page 45.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the symbol
Seite 63
Displays Controls
63
Online Edition for Part no. 01 40 2 609 184 - 09 11 500
To Next Page
Loading...
Need help?
General
