EasyManuals Logo

BMW Z4 sDrive28i User Manual

BMW Z4 sDrive28i
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #167 background imageLoading...
Page #167 background image
Suitable additives
Only use suitable additives; otherwise, en‐
gine damage may occur. The additives are
harmful to your health.◀
Coolant consists of water and additives.
Not all commercially available additives are suit‐
able for your vehicle. Ask your service center for
suitable additives.
Checking the coolant level
1. Let the engine cool.
2. Turn the expansion tank cap counterclock‐
wise slightly to allow any accumulated pres‐
sure to escape, then continue turning to
open.
3. The coolant level is correct if it is between
the maximum and minimum marks in the
filler neck, refer also to the diagram next to
the filler neck.
4. If the coolant is low, slowly add coolant up to
the specified level; do not overfill.
5. Turn the cap until there is an audible click.
6. Have the cause of the coolant loss elimi‐
nated as soon as possible.
Disposal
Comply with the appropriate environmen‐
tal protection regulations when disposing
of coolant additives.
Seite 167
Engine compartment Mobility
167
Online Edition for Part no. 01 40 2 609 184 - 09 11 500

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW Z4 sDrive28i and is the answer not in the manual?

BMW Z4 sDrive28i Specifications

General IconGeneral
BrandBMW
ModelZ4 sDrive28i
CategoryAutomobile
LanguageEnglish

Related product manuals