Turn the Allen wrench in the correct
direction
Do not turn the Allen wrench in the opposite
direction as this may damage the mecha‐
nism.◀
7. Turn the Allen wrench as far as it will go, ar‐
row 2. The transmission lock is released.
8. Draw the Allen wrench out of the opening.
Locking the transmission lock again
After parking the vehicle, lock the trans‐
mission lock again to prevent the vehicle from
rolling.◀
Locking manually
1.
Press the button, see arrow. The transmis‐
sion lock is locked again.
2. Clip the cover frame back into place.
3. Clip the sleeve of the selector lever back in
place.
4. Set the parking brake.
Jump-starting, refer to page 177, towing, refer
to page 179.
Seite 59
Driving Controls
59
Online Edition for Part no. 01 40 2 609 184 - 09 11 500
To Next Page
Loading...
Need help?
General
