Bosch ACS 810 Repair Instructions

| 22 | ACS 810 | Troubleshootingen
1 689 975 253 2021-01-26| Robert Bosch GmbH
9. Troubleshooting
9.1 Service messages
Service message Actions
CHANGE OIL Change vacuum pump oil
(see section 12.7.1)
REPLACE FILTER Replace combo filter
(see section 12.6.1)
9.2 Fault messages
failure indication Actions
HIGH PRESSURE There is excess pressure at the outlet of the compressor.
Turn off the ACS 810 and wait approx. 30 minutes.
PROGRAM ERROR Error in the software.
FULL TANK The internal refrigerant cylinder has been filled to maximum filling level.
Carry out several refill procedures to reduce the internal refrigerant quantity.
HIGH RECOVERY TIME The recovery time exceeds the set maximum duration. Check the vehicle air
conditioning system for leaks. If error persists, contact customer service.
A/C SYSTEM EMPTY There is no refrigerant in the vehicle air conditioning system.
A/C SYSTEM FULL There is refrigerant in the air conditioning system.
INCOMPLETE CHARGE The filling time exceeds the safe maximum duration set.
Pressure in internal refrigerant cylinder corresponds to pressure in vehicle
air conditioning system.

Bosch ACS 810 Specifications

General

Brand	Bosch
Model	ACS 810
Category	Service Equipment
Language	English