| 4 | ACS 810 | Important informationen
1 689 975 253 2021-01-26| Robert Bosch GmbH
2. Important information
Installation and/or repairs must only be performed
by trained and instructed Bosch customer service
representatives or companies authorized by Bosch
If the units are opened or modified by unauthorized
persons, any warranty claims become void.
Electrical systems and devices must only be put into
operation when in proper operating condition (details
can be found in the EDIS-Info 200108_084). This
requirement is met if following modification or repair
(initial testing) it is ensured that the requirements
of the electrical engineering directives were adhered
to. To check this, tests should be performed, the
nature and extent of which are based on the measures
specified in the electrical engineering directives (e.g.
in Germany DGUV Vorschrift3). The type and extent
of the tests are described in VDE0701/0702Part1
within Germany. The relevant national directives must
be complied with.
3. Test equipment and
auxiliary materials
R General tools for electricians and A/C mechanics
R Digital multimeter (e.g. MMD 003)
R Loctite 542 (for thread seal) and 222 (for thread
lock)
R Cleaning agent (e.g. brake cleaner)
R Calibrating weight 10 - 20 kg for internal refrigerant
scale
R Leak detector (1 689 100 057)
R Simulator (optional)
To Next Page
Loading...
Need help?
General
