3. Productbeschrijving
3.1 Beoogd gebruik
Met de krachtige acculader BAT 645 wordt elk type
12Volt of 24Volt loodaccu geladen, bijv. accu's met
vast elektrolyt (gel-technologie of vlies/AGM-technolo-
gie) en lithium-ijzerfosfaat-accu's (LFP = LiFePO
4
) MET
accumanagementsysteem (BMS). U kunt de accu's
zowel in het voertuig in ingebouwde toestand alsook
in verwijderde toestand laden. BAT 645 kan ook toege-
past worden als ondersteuning en voorziening van de
elektrische installatie.
De toepassingsgebieden waarvoor de BAT 645 be-
stemd is, zijn autogarages, testorganisaties, tankstati-
ons en de accuhandel.
i BAT 645 zijn uitsluitend geschikt voor het laden van
intacte loodaccu's en lithium-ijzerfosfaat-accu's met
een nominale spanning van 12 Volt of 24 Volt.
3.2 Leveringsomvang
Benaming Bestelnummer
BAT 645 Zie typeplaatje
Netsnoer 3 m 1 684 461 195
Laadkabel rood/zwart (3 m; 6 mm
2
) 1 687 011 534
Wandhouder 1 688 005 253
Gebruiksaanwijzing BAT 645 1 689 989 233
Instructies voor de gebruiker
Accu-service-producten
1 689 979 946
3.3 Apparaatbeschrijving
1
2
3
4
8
7
9
5
4510026-04_Ko
Afb. 1: Vooraanzicht BAT 645
1 Aan-/uitschakelaar
2 Netaansluiting
3 Aansluitbus voor rood (+)/zwarte (–) laadkabel
4 USB-aansluiting (alleen voor technische dienst)
5 Keuzetoetsen
6 LCD-display
7 Rode LED voor "netspanning aan", "poolomwisseling", "storing
of overbelasting"
8 Groene LED voor "laadmodus"
9 Gele LED voor "stand-by" en "buffermodus"
3.3.1 Keuzetoetsen
Toets Functie
Menu/modus activeren
(rode LED brandt) of
menustap verder
Laadprocedure onderbreken of
menustap terug
Menu/bedrijfsmodus kiezen of
parameter wijzigen (vergroten)
Menu/bedrijfsmodus kiezen of
parameter wijzigen (verkleinen)
3.3.2 Status LEDs
Symbool LED Kleur Toestand Functie
Rood Brandt BAT 645 ingeschakeld
en accu aangesloten
Knippert Storingen, bijv. poolom
-
wisseling, kortsluiting
Uit BAT 645 uitgeschakeld
I
Groen Knippert
snel
Hoofdlading actief
Knippert
langzaam
Bijlading actief
Brandt Druppellading actief
Uit Laadprocedure niet
actief
v
Geel Brandt Buffermodus
Knippert Stand-by
Uit Buffermodus of stand-by
niet actief
Status LED geel LED groen
Zachte laadfase
bij sterk ontla
-
den loodaccu's
of voorlaadfase
bij LFP-accu's
Knippert
(Knipperfrequentie
1seconde)
Knippert
(Knipperfrequentie
1seconde)
Productbeschrijving | BAT 645 | 167 | nl
1 689 989 233 2022-01-24| Robert Bosch GmbH