Bosch D9112B User Manual

D9112B | Program Entry Guide | 2.0 Area Wide Parameters EN | 32
Bosch Security Systems | 2/04 | 74-06145-000-D
A# Restricted O/C
This item determines if this area can restrict Opening and Closing report activity.
A
Restricted Opening report refers to the panel sending an Area Opening report ONLY when the area is
disarmed after a non-fire alarm.
A
Restricted Closing report refers to the panel sending an Area Closing report ONLY when the area has been
master armed with controlled points that were faulted during the arming sequence. The sequence of reports
generated by a restricted closing are:
Was Forced Armed , Forced Point , Forced Close , then Closing Report .
Default: No
Selection: Yes or No
Yes
Restrict
Opening and Closing reports for this area. A# Area O/C must be programmed YES to
generate
Restricted Opening and Closing reports.
Note:
If a passcode is not required for arming or disarming and this item is YES, the area only sends Restricted
Opening and Closing reports. In this case, restricted reports are sent without User ID.
Opening /Closing Window does not affect this report: Windows do not prevent
Restricted
Opening and Closing reports from being sent. Early or late designations are NOT added to
Opening /Closing reports when they are sent according to the rules for restricted Opening/Closing
reports.
No
Do not restrict
Opening and Closing reports for this area.
Regardless of programming in Authority Levels
L## Restricted O/C , reports are not restricted in this
area when this item is programmed NO.

Bosch D9112B Specifications

General

Brand	Bosch
Model	D9112B
Category	Control Panel
Language	English