Bosch D9112B User Manual

D9112B | Program Entry Guide | 3.0 User Interface EN | 52
Bosch Security Systems | 2/04 | 74-06145-000-D
L## Perim Delay
Perimeter Delay Arm
Default: See Program Record Sheet
Selection: Blank or E
Blank Disable this function for Authority Level (L##) specified, if this item in Command Center Function
requires a passcode (P).
E Enable this function for Authority Level specified. When the passcode is entered at the command
center, the panel checks the authority level. The panel executes the function only in areas where the
passcode is authorized.
Programming in O/C Options
Perimeter O/C determines whether Perimeter Closing reports can
be generated for a particular area.
Whether
Perimeter Closing reports and subsequent Opening reports are generated by this user or
not depends on the L## Perimeter O/C prompt in Authority Lvl Assign.

Bosch D9112B Specifications

General

Brand	Bosch
Model	D9112B
Category	Control Panel
Language	English