English – 30
1 270 020 Wen | (13.5.16) Bosch eBike Systems
– “My Profile”: Here you can also choose to display the active user.
– “My eBike”: When Nyon is plugged in, you can change the pre-set value
given by the manufacturer of the wheel circumference by ± 5 %.
The bicycle manufacturer or dealer may base the service date on the
distance travelled and/or a period of time. The due date for the service
is displayed under “Service”.
Under “Shift Recommendation”, you can switch the indication of a
shift recommendation on and off.
If your eBike is equipped with “eShift”, you can also configure your
eShift system here (see “eShift (optional)”, page English – 37).
– “My Nyon”: Here you can search for updates, configure the Home but-
ton, automatically set the counters such as trip meter, calories burned
and average values to “0” every night, or reset Nyon to the factory
settings.
Under “Auto Brightness”, the brightness of the display can be auto-
matically adjusted.
Under “Altitude correction”, you can adjust the value displayed to the
actual altitude to compensate for weather-related changes.
– “Region & Language”: You can set speed and distance in kilometres or
miles, display clock in 12 or 24 hour format, select the time zone and
set your preferred language. The current time is automatically taken
from the GPS signal.
–In the “Help” menu item, you will find a selection of FAQs (frequently
asked questions), contact details and information about the system and
licenses.
To Next Page
Loading...
Need help?
General
