English – 57
Bosch eBike Systems 1 270 020 Wen | (13.5.16)
450 Internal software error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
460 Error at USB
connection
Remove the cable from the USB con-
nection of the on-board computer. If
the problem persists, contact your
Bosch eBike dealer.
490
Internal error of the
on-board computer
Have the on-board computer checked.
500
Internal error of the
drive unit
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
502 Bike lighting error Check the light and the associated
wiring. Restart the system. If the
problem persists, contact your Bosch
eBike dealer.
503
Error of the speed
sensor
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
510
Internal sensor error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
511 Internal error of the
drive unit
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
530
Battery pack error Switch off the eBike, remove the eBike
battery pack and reinsert the eBike
battery pack. Restart the system. If the
problem persists, contact your Bosch
eBike dealer.
531
Configuration error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
540
Temperature error The eBike is outside of the permissible
temperature range. Switch off the
eBike system and allow the drive unit
to either cool down or heat up to the
permissible temperature. Restart the
system. If the problem persists,
contact your Bosch eBike dealer.
Code Cause Corrective Measure