31
Operation
NOTICE: After 10 minutes of inactivity, the e-bike will auto matically
switch off.
• Before you switch the e-bike on, check whether the recharge-
able battery is charged and has been properly inserted (see
chapter “Operation > Rechargeable battery”).
Activating the e-bike
NOTICE: Do not apply pressure to the pedals during activation.
To switch on the e-bike
• push the
button on the rechargeable battery or
• push the
button when the control computer is inserted
(see chapter “Operation > Control computer”) or
• insert the control computer, which has been switched on.
NOTICE: The e-bike cannot be switched on when charging the
rechargeable battery on the e-bike.
Fig.: B-12 Control computer “ActiveLine” and “PerformanceLine”
(left) and the control unit (right).
Fig.: B-13 Control computer “Nyon” (left) and the control unit (right).
WALK
WALK
On/Off button
Fig.: B-14 Control computer “Purion” with on/off button.