35
Operation
Basic settings
NOTICE: This chapter only applies for “ActiveLine”,
“PerformanceLine” and “Purion” (if applicable, see chapter
“Operation > Nyon”).
You can select the following basic settings:
- Unit km/mi: Indicator for speed and distance in kilometres or
miles.
- Time format: The time is displayed in 12 or 24 hour format.
- Time: Changing the time.
NOTICE: Pushing and holding the – (minus) or + (plus) buttons
accelerates how fast the time changes.
- English: You can change the language of the text in the text
display field. You can choose from German, English, French,
Spanish, Italian and Dutch.
- Total cycling time: Displays the total cycling time with the
e-bike (cannot be changed).
- Wheel circumference: If other tyres are used, this value can
be changed by ±5 %.
Displaying and changing the basic settings is possible when the
control computer is inserted and removed.
1. To select the basic settings, push the RESET button and the
button at the same time until “Settings” appears in the text
display field.
2. Push the
button repeatedly until the desired basic setting
appears.
3. To reduce the value or scroll down, push the
button.
To increase the value or scroll up, push the
button.
• When the control computer is inserted, use the – (minus) or
+ (plus) buttons on the control unit.
4. To leave the basic setting and save it, push the RESET button
for 3 seconds.
To Next Page
Loading...
Need help?
General
