37
Operation
Optional basic settings
NOTICE: This chapter only applies for the “ActiveLine” or
“PerformanceLine” with the option “Intuvia eShift” and electronic
gear shift.
- Gear recommendation on/off: You can activate or deactivate
the gear recommendation display.
- Gear calibration (only for models with the “NuVinci H|Sync”
gear shift): Calibration of the continuous variable gear.
• Start the calibration by pushing the
button on the control
computer.
• Then follow the instructions on the indicator.
- Displ. vx.x.x.x: Software version of the indicator.
- DU vx.x.x.x*: Software version of the drive unit.
- Bat vx.x.x.x*: Software version of the rechargeable battery.
- Gear vx.x.x.x*: Software version of the gear shift.
* This value is only displayed if the board computer is located
in the holder.
Setting the level of assistance
Level of
Assistance
Fig.: B-20 Assistance level indicator for “ActiveLine” or
“Performance Line” (left) and “Nyon” (right).
1. Push the + (plus) or – (minus) button on the control unit to
adjust the assistance level.
2. Select one of the following levels:
OFF: The drive is deactivated. You can propel the e-bike by
pedalling, just like a bicycle.
ECO: Effective assistance with maximum efficiency for maxi-
mum range.
TOUR: Uniform assistance, for touring with a long cruising
range.
SPORT: Powerful assistance for sportive riding on mountainous
routes as well as for urban traffic.
TURBO: Maximum assistance, supporting the highest cadence
for sportive riding.
To Next Page
Loading...
Need help?
General
