8.2 CE marking
8.2.1 Declaration of conformity
The electronic products described in the present operating instructions comply with the requirements
and the target of the following EU directive and with the following harmonized European standards:
Table 11: Normen zur elektromagnetischen Verträglichkeit (EMV) – Standards for electromagnetic
compatibility (EMC) – Normes sur la compatibilité électromagnétique (CEM)
Norm
Standard
Norme
Bedeutung
Meaning
Signification
Ausgabe
Edition
Édition
DIN EN 61000-6-2 Elektromagnetische Verträglichkeit (EMV)
Teil: 6-2: Fachgrundnormen – Störfestigkeit für Industrieber-
eiche
Normes génériques – Immunité pour les environnements
industriels
November 2019
DIN EN 61000-6-4 Elektromagnetische Verträglichkeit (EMV)
Teil: 6-4: Fachgrundnormen – Störaussendung für Industrie-
bereiche
Normes génériques – Norme sur l’émission pour les environ-
nements industriels
September 2011
Loss of CE conformity due to modifications at the device.
CE marking applies only to the device upon delivery. After modifying the device, verify the CE
conformity.
8.3 UL/CSA certified
The devices are certified according to
•
UL 61010-2-201 (Industrial Control Equipment) and
• CSA22.2 No. 61010-2-201 (CSA)
However, there can be combinations or extension stages with a limited or missing certification. Thus,
verify the registration according to the UL marking on the device.
Loss of UL/CSA conformity due to modifications at the device.
UL and CSA marking applies only to the device upon delivery. After modifying the device, verify
the UL and the CSA conformity.
To guarantee an UL/CSA-compliant operation, the following conditions have to be met:
−
Use only insulated copper wires suitable for at least 60 °C
To Next Page
Loading...
Need help?
General
