1.3 Scope
This operating instructions is valid for all variants of the control, whose type codes start with:
COREX-C.
The type code specifications are located on the type plate of the device. Also refer to ⮫ Chapter 2.1
“Product identification” on page 8.
1.4 Related documents
Table 2: Related documentation
Title Part number and document type
Security Manual
Electric Drives
and Controls
⮫ R911342562
Project Planning Manual
Rexroth IndraControl
VAP 01
Power Supply Unit
⮫ R911339613
Operating Instructions
Rexroth IndraControl
VAU 01.1
UPS with Communication Interface
⮫ R911336867
Operating Instructions
1.5 Customer feedback
Customer requests, comments or suggestions for improvement are of great importance. Please email
your feedback on the documentations to ⮫ Feedback.Documentation@boschrexroth.de. Directly insert
comments into the electronic PDF document and send the PDF file to Bosch Rexroth.
About this documentation