9 Interfaces
9.1 Interface description
Fig. 4: Interfaces
① and ④ are not enabled for the COREX-C-X2 variant.
NOTICE
Damage of the device by plug mounting under voltage!
− Before mounting or dismounting components, disconnect the control -
including its components - from voltage.
−
Connect the voltage only after the control and its components have been
set up.
Table 7: Control interfaces
No. Name Connection type Connector type
(integrated)
Mating connector and cable
(From outside)
X2 X3 X3
PLUS
➀
XF01 USB host
USB 2.0
USB socket,
Type C
USB plug,
Type C
‒ ✓ ✓
➁
XF10 Ethernet
10/100/1000 MBit
HMI and engineering port
RJ45 socket
8-pin
RJ45 plug
(twisted pair, 8-wire)
✓ ✓ ✓
➂
XF50 Ethernet
10/100/1000 MBit
Field bus master (Ethercat)
RJ45 socket
8-pin
RJ45 plug
(twisted pair, 8-wire)
✓ ✓ ✓