Brother DCP-T220 User Manual

Home > Network > Wireless Network Settings > Use the Wireless Network > Configure Your Machine for a
Wireless Network Using the One Push Method of Wi-Fi Protected Setup
™
(WPS)
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup
™
(WPS)
Related Models: DCP-T420W/DCP-T425W
If your wireless access point/router supports WPS (Push Button Configuration), you can use WiFi Button/LED
on your machine's control panel to configure your wireless network settings.
1. Press WiFi Button/LED three times.
The WiFi Button/LED starts blinking.
2. Press the WPS button on your wireless access point/router.
If your wireless device is connected successfully, the Power LED and WiFi Button/LED are lit.
You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's Downloads page at
support.brother.com.
(Windows) Or, use the Brother installation disc to set up your machine (not available in all countries).
Related Information
• Use the Wireless Network
114

Brother DCP-T220 Specifications

General

Style	Inkjet
Color	Black
Control Panel	-
Interface Connectors	Hi-Speed USB 2.0
Wireless Connectivity	Wireless Network
Apple Macintosh OS X 10.5 or later; Linux	Windows 8
Mac OS® X 10.6.8 – 10.10.x8	Windows 8
MPT: Min. A6R - Max. A4R (Legal)	No. 10 (Envelope)
MPT: Min. A6R – Max. A4 (Legal)	8 in x 10 in
Duplex Printing: A4 / Letter / Oficio / Folio / Legal / JIS B5 / ISO B5 / Executive / Statement	DL (Envelope)
Manual Feed Slot: Letter	Envelopes (C5
Functions	Copy
Features	photo sharing
Printing Method	-
Nozzles	90 Nozzles Black
Print Resolution	600 x 600 dpi
Scanner Type	-
Scan Formats	-
Copy Modes	-
Max Copies	99
Copy Size	Width: 8.26 in. (210 mm)
Copy Scale	25 - 400%
Power Consumption	0
Battery Life	-
Battery Capacity	-

Weight and Dimensions

Depth	14.1 in
Height	6.3 in
Width	17.1 in
Net Weight	12