Brother FAX 2820 User Manual

R - 1
R
If you plan to receive fax messages while away from your machine, carrying the Remote Retrieval
Access Card printed below will serve as a convenient reminder of the retrieval procedures. Simply
cut out the card and fold it to fit your wallet or organizer. Keeping it handy will help you derive the
full benefit of your machine’s Paging, Fax Forwarding and Remote Retrieval features.
Remote Retrieval Access card
Using Remote Access Code
1
Dial your fax number from a telephone or fax machine using touch tone. When your machine answers, immediately enter your Remote Access Code (3 digits followed by ). Your machine signals the kinds of messages it received: 1 long beep — Fax messages No beeps — No messages. After 2 short beeps, enter a command. Press
9 0
to reset your machine when you finish.
Hang up.
2
3
4
5 6
1
4
Press
9 7 1
1 long beep — Fax messages 3 short beeps — No messages
CHANGE RECEIVE MODE Press
9 8
then for External TAD, press
1
.
Fax Only, press
3
.
Fax/Tel, press
2
.
EXIT REMOTE OPERATION Press
9 0
.
CHECK RECEIVING STATUS
R
EMOTE
R
ETRIEVAL
A
CCESS
C
ARD
Fold Fold

Brother FAX 2820 Specifications

General

Modem speed	14.4 Kbit/s
Color faxing	No
Print technology	Laser
Fax speed dialing (max numbers)	200
Fax memory	8 MB
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	14 cpm
Copy resolution (black text)	200 x 300 DPI
Standard input capacity	250 sheets
Standard output capacity	100 sheets
Auto document feeder (ADF) input capacity	20 sheets
Power consumption (typical)	80 W

Weight and Dimensions

Weight	7250 g
Dimensions (WxDxH)	374 x 374 x 262 mm