Brother FAX 560 User Manual

6 - 2 SETUP SEND
T7BASE-US-FM5.5
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before
sending the fax.
1 Place the original face down in the ADF.
2 Pick up the handset and listen for a dial tone
—OR—press Hook and listen for a dial tone.
3 Enter the fax number you want to call. (You can enter the digits using the dial pad, or
you can enter a One Touch or Speed Dial number or you can call using
Search/Speed Dial.) (See One Touch Dialing, page 7-4 and Search, page 7-6.)
4 When you hear the fax tone, press Start.
5 If you’re using the handset, hang up.
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset, or press Hook.
1 Place the original face down in the ADF.
2 Enter the fax number using One Touch, Speed Dial, Search or the dial pad. (See One
Touch Dialing, Speed Dialing and Search, page 7-4 to 7-6.)
3 Press Start.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the
number.
If you’re sending a fax automatically and the line is busy, the fax machine will redial
automatically up to three times at 5 minute intervals.

Brother FAX 560 Specifications

General

Brand	Brother
Model	FAX 560
Category	Fax Machine
Language	English