Brother MFC-210C User Manual

1 - 2 INTRODUCTION
Control panel overview
1
Redial/Pause
Redials the last number you called.
It also inserts a pause in quick dial
numbers.
2
Hook
Press before dialing if you want to
make sure a fax machine will
answer, and then press Mono Start
or Colour Start.
3
Ink Management
Lets you clean the print heads,
check the print quality, and check
the available ink volume.
4
Dial Pad
Use these keys to dial telephone or
fax numbers and as a keyboard for
entering information into the MFC.
The # key lets you temporarily
switch the dialling mode during a
telephone call from Pulse to Tone
(Not available in New Zealand).
5
Mode keys:
PhotoCapture
Lets you access the PhotoCapture
Center
™
mode.
Copy
Lets you access Copy mode.
Fax
Lets you access Fax mode.
Scan
Lets you access Scan mode.
6
Copy Options
You can quickly and easily select
temporary settings for copying.
7
Fax Resolution
Sets the resolution when you send a
fax.
8
Mono Start
Lets you start sending faxes or
make copies in black and white.
Also lets you start a scanning
operation (in colour or mono,
depending on the scanning setting
on your PC).

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office