Brother MFC-210C User Manual

2 - 1 GETTING STARTED
2
Initial Setup
Setting the Date and Time
When the MFC is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your MFC will
be printed on every fax you send. If there is a power failure, you may
have to reset the date and time. No other settings will be affected.
1
Press
Menu/Set
,
0
,
2
.
2
Enter the last two digits of the year.
Press
Menu/Set
.
3
Enter two digits for the month.
Press
Menu/Set
.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press
Menu/Set
. (For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press
Menu/Set
. (For example, enter 15:25 for 3:25 P.M.)
6
Press
Stop/Exit
.
The LCD now shows the date and time whenever the MFC is in
Fax mode.
Setting Tone or Pulse dialling mode
(Not available in New Zealand)
1
Press
Menu/Set
,
0
,
4
.
2
Press
▲
or
▼
to select
Pulse
(or
Tone
).
Press
Menu/Set
.
3
Press
Stop/Exit
.
Getting started

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office