Brother MFC-210C User Manual

3 - 8 SETUP SEND
Real Time Transmission
When you are sending a fax, the MFC will scan the documents into
the memory before sending. Then, as soon as the phone line is free,
the MFC will start dialling and sending.
If the memory becomes full, the MFC will send the document in real
time (even if
Real Time TX
is set to
Off
).
Sometimes, you may want to send an important document
immediately, without waiting for memory transmission. You can set
Real Time TX
to
On
for all documents or for the next fax only.
If you want to fax multiple pages from the scanner glass, Real Time
Transmission should be set to
Off
.
1
If it is not illuminated in green, press (
Fax
).
2
Load your document.
3
For MFC-210C, press
Menu/Set
,
2
,
2
,
3
.
For MFC-410CN, press
Menu/Set
,
2
,
2
,
5
.
4
To change the default setting, press
▲
or
▼
to select
On
(or
Off
).
Press
Menu/Set
.
—OR—
For the next fax transmission only, press
▲
or
▼
to select
Next Fax Only
.
Press
Menu/Set
.
5
Press
▲
or
▼
to select
On
(or
Off
).
Press
Menu/Set
.
In Real Time Transmission, the redial feature does not work.
If you are sending a colour Fax, the MFC will send it in real time
(even if
Real Time TX
is set to
Off
).

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office