Brother MFC-210C User Manual

1 - 4 INTRODUCTION
Turning the MFC to Power Save condition
When the MFC is idle, you can turn it to Power Save condition by
pressing the Power Save key. In Power Save mode, the MFC will
receive telephone calls as normal. For further information on
receiving faxes in the power save condition, please see the table on
page 1-5. The delayed faxes that have been set up will be sent
(MFC-410CN only). You can even retrieve faxes using Remote
Retrieval if you are away from your MFC (MFC-410CN only). If you
want to do other operations, you must turn the MFC back on.
Turning the MFC to Power Save condition
Press and hold down the
Power Save
key until the LCD shows:
The LCD light will go off.
Turning the MFC to Power Save condition off
Press and hold down the
Power Save
key until the LCD shows:
The LCD will show the date and time (Fax
mode).
Even if you turned the MFC off, it will periodically clean the print
head to preserve print quality.
If you unplug the AC power cord, no MFC operations will be
available.
You can turn the MFC Off by customizing the
Power Save
key
as shown next page. In this Off mode, no MFC operation will be
available. (See
Power Save Setting
on page 1-5.)
The external telephone is always available.
Shutting Down
Please Wait

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office