Brother MFC-210C User Manual

3 - 6 SETUP SEND
Fax Resolution
You can use the
Fax Resolution
key to change the setting
temporarily (for this fax only). In Fax mode (
Fax
), press
Fax Resolution
and
▲
or
▼
to select the setting you want, and then
press
Menu/Set
.
—OR—
You can change the default setting:
1
If it is not illuminated in green, press (
Fax
).
2
Load your document.
3
Press
Menu/Set
,
2
,
2
,
2
.
4
Press
▲
or
▼
to select the resolution you want.
Press
Menu/Set
.
Standard
Suitable for most typed documents.
Fine
Good for small print and transmits a little
slower than Standard resolution.
S.Fine
Good for small print or artwork and transmits
slower than Fine resolution.
Photo
Use when the document has varying shades
of gray or is a photograph. This has the
slowest transmission time.

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office