30
10
Receive Modes 10
You must choose a Receive Mode depending on the external devices and telephone services you
have on your line.
Choose the Receive Mode 10
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct mode.
(See Using Receive Modes on page 31.)
To set the Receive Mode follow the instructions:
a Press (Settings).
b Press All Settings.
c Press a or b to display Fax.
d Press Fax.
e Press a or b to display Setup Receive.
f Press Setup Receive.
g Press a or b to display Receive Mode.
h Press Receive Mode.
Receiving a fax 10
Do you want to use the telephone features of your machine (if available),
an external telephone or external telephone answering device connected on the
same line as the machine?
Yes
Fax Only
No
No
No
Manual
Yes
External TAD
Fax/Tel
Are you using the voice message function of
an external telephone answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Yes
To Next Page
Loading...
Need help?
General
