Canon EOS 300 User Manual

Mounting and Detaching a Lens
Mounting a Lens
| Remove the rear lens cap and the
camera body cap.
Align the red dots on the lens and
camera and turn the lens as
shown by the arrow until it snaps
in place.
On the lens, set the focus mode
Switch to AF.
* If the focus mode switch is set to МЕ
(or M on older lenses), autofocus will
not operate.
* While the lens autofocuses, do not
touch the lens where it rotates
jJ Remove the front lens cap.
= = * Be careful not to lose the front and
rear lens caps.
While pressing the lens release
button, turn the lens as shown by
the arrow until it stops. Then
remove the lens.
* AF stands for Autofocus.
* MF stands for Manual Focus.
18

Canon EOS 300 Specifications

General

Type	Digital SLR
Format	APS-C
Flash Modes	Auto, Manual, Red-Eye Reduction
Video Recording	No
Sensor	CMOS
Lens Mount	Canon EF
Shutter Speed	1/4000 to 30 sec, Bulb
ISO Range	100-3200
Metering Modes	Evaluative, Partial, Center-weighted average
Focus Modes	One-Shot AF, AI Servo AF, AI Focus AF
Storage	SD/SDHC/SDXC