Canon EOS 300 User Manual

Loading and Unloading Film
Е
Ф · "о fim cannot be used with this camera.
* The shutter curtains are manufactured with very
high precision. To prevent damage, never touch the
shutter curtains. When loading or unloading film, be
careful not to touch the shutter curtain with your
fingers or the film.
With DX-coded film, the camera automatically sets the film's ISO speed.
If the film is not DX-coded, set the ISO speed manually. See раде 57.
Unloading Film
After the film's last frame is exposed, the camera rewinds the film
automatically.
When the film rewind ends, the camera
will make a shutter-release sound and
the <@> icon will blink on the LCD
panel. Before opening the camera
back to unload the exposed film, make
sure the icon is blinking.
С) Midroll Film Rewind
To rewind the film before reaching the last frame, follow the Steps be below.
Press the <@=*> button.
* The film will start rewinding. The
operation will then be the same as
normal film rewind.
Open the camera back and
remove the film.
21

Canon EOS 300 Specifications

General

Type	Digital SLR
Format	APS-C
Flash Modes	Auto, Manual, Red-Eye Reduction
Video Recording	No
Sensor	CMOS
Lens Mount	Canon EF
Shutter Speed	1/4000 to 30 sec, Bulb
ISO Range	100-3200
Metering Modes	Evaluative, Partial, Center-weighted average
Focus Modes	One-Shot AF, AI Servo AF, AI Focus AF
Storage	SD/SDHC/SDXC