Canon EOS 300 User Manual

Handling Precautions
Lithium Batteries
(1) The camera operates on two CR2 lithium batteries. Check the battery
level in the following cases:
* After replacing the batteries.
* After not using the camera for an extended period.
* The shutter stops working.
* The camera is being used in a low-temperature environment.
* You will be shooting an important event.
Before installing the batteries, wipe the battery contacts to remove any
fingerprints and smudges. This is to prevent faulty connections and
corrosion.
Although the batteries work well even at low temperatures, battery
performance may decline slightly at freezing temperatures. In such a
case, keep spare batteries warm in a pocket, etc., and use and warm
the batteries alternately.
(2
в
How Low Battery Levels Affect Camera Operation
Even when 27: blinks on the LCD panel, a proper exposure will be
obtained as long as the shutter releases. However, since the battery level
is low, film advance and auto rewind may not work. Replace the batteries
with new ones.
Lens
After detaching the lens from the camera,
put on the lens caps or put down the lens
with the rear end up to avoid scratching
the lens surface and electrical contacts.
electrical contacts

Canon EOS 300 Specifications

General

Type	Digital SLR
Format	APS-C
Flash Modes	Auto, Manual, Red-Eye Reduction
Video Recording	No
Sensor	CMOS
Lens Mount	Canon EF
Shutter Speed	1/4000 to 30 sec, Bulb
ISO Range	100-3200
Metering Modes	Evaluative, Partial, Center-weighted average
Focus Modes	One-Shot AF, AI Servo AF, AI Focus AF
Storage	SD/SDHC/SDXC