44
Bulb
(Long
Exposure)
Photography
In
bulb photography, the shutter remains open as long as the shutter but-
ton
is
held down. When you release the shutter button, the shutter will
close. Use this function when long exposures are required , such as when
shooting night shots or fireworks. Make sure the camera does not move
during exposure
by
using a tripod or placing
it
on some other steady sur-
face. Bulb photography can be made easier by using the release lock
function on the remote switch RS-60E3.
1.
Set the command dial
to
M.
2. Turn the electronic input dial until
the shutter speed
is
set to
buLb
(after
30").
3. Set the desired aperture value by
turning the electronic input dial while
pressing the exposure compensa-
tion button.
buLb
,-
,-
J.C/
4. Compose the photograph and take
the picture. The shutter will remain
open as long as the shutter button
is
held down.
• The
buLb
indicator
on
the display will
blik while the bulb photograph
is
being
taken.
• When using new batteries, about s
ix
hours of bulb photography can
be
car-
ried out.
• Bulb photography can be combined
with the multiple-exposure
fun
ction.
To Next Page
Need help?
General
