Printing Maintenance
44
Printing Maintenance
Printing MaintenancePrinting Maintenance
Printing Maintenance
Replacing an Ink Tank
When replacing an ink tank, check the model number very carefully.
The printer will not print properly if the wrong ink tank is used, or installed in
the incorrect position.
With this printer, ink tanks must be installed from the left to right in the order of Cyan,
Photo Cyan, Black, Yellow, Photo Magenta, Magenta.
•Cyan: BCI-6C
• Photo Cyan: BCI-6PC
• Black: BCI-6BK
• Yellow: BCI-6Y
• Photo Magenta: BCI-6PM
• Magenta: BCI-6M
Knowing When to Replace Ink Tank
If an ink tank needs replacing, the POWER
POWERPOWER
POWER lamp will change from green to orange and
flash four times, as soon as printing begins. It is important to quickly identify the
empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and
replace it.
Note
Should missing characters or white streaks appear despite
sufficient ink levels, refer to the section "When Printing Becomes
When Printing Becomes When Printing Becomes
When Printing Becomes
Faint or Colors are Incorrect
Faint or Colors are IncorrectFaint or Colors are Incorrect
Faint or Colors are Incorrect" on page 49.
i960_QSG_US.book Page 44 Friday, July 11, 2003 9:57 AM
To Next Page
Loading...
Need help?
General
