6
Do not install the machine in locations where there
are risks of a fire or electrical shock
•
A location where the ventilation slots are block
ed
(i.e. by the walls, on the soft surface such as a bed,
sofa, or rug)
•
A damp or dusty location
•
A location exposed to direct sunlight
•
A location subject to high temperatures
•
A location near open flames
•
A location near alcohol, paint thinner, or other
flammable substances
O
ther Warnings
•
D
o not place jewelry and other metal objec
ts,
or containers filled with water or liquids on the
machine. If these items come into contact with a
high-voltage area inside the machine, it may result in
a fire or electrical shock.
•
Do not use the machine near any medical
equipment. Electric waves emitted from the machine
may interfere with medical equipment, which may
result in a malfunction or personal injury.
•
If objects are dropped or spilled inside the machine,
immediately turn OFF the main power switch, and
disconnect the power cord from the power outlet.
Then, contact your local authorized Canon dealer.
CAUTION
Important Safety Instructions
These "Important Safety Instructions" are intended to prevent injury to user or other persons or destruction of
property. Please read these instructions thoroughly before operating the machine. Also, since it may result in
unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual. Improper
operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may not
be covered under your Limited Warranty.
▀
Installation
Read the following installation precautions thoroughly to maintain a comfortable and safe working environment, in
areas of machine operation.
WARNING
Do not install the machine in unstable locations
Installing the machine in the following locations
my cause the machine to fall or tip over, r
esulting in
personal injury.
•
An unsteady platform
•
A location subject to excessive vibrations
Do not remove the leveling feet
Do not remove the machine’s leveling feet after the
machine has been installed, as this may cause the
machine to fall or tip over
, resulting in personal injury.
Avoid installing the machine at high altitudes of
about 3,000 meters above sea level
, or higher.
Machines with a hard disk may not operate properly
when used at high altitudes of about 3,000 meters
above sea level, or higher
.
Avoid installing the machine near computers or
other precision electronic equipment.
Electr
ical interference and vibrations generated by
the machine while printing can adversely affect the
operation of such equipment.
To Next Page
Loading...
Need help?
General