Cover/Sheet Insertion
4-11
4
Special Copying and Mail Box Features
Cover/Sheet Insertion
This mode enables you to set the machine to automatically add front and back covers, and
sheet insertions or chapter pages using a different type of paper from that used for the main
documents. In addition, you can decide whether the front and back covers, and the sheet
insertions are copied on as well. Chapter pages are always copied on.
IMPORTANT
•
The Cover/Sheet Insertion mode cannot be used with the following mode(s).
- Copy: Group, Offset Group, Rotate Collate, Rotate Group, Book 2-Sided, Two-page Separation,
Image Combination, Transparency Interleaving, Image Repeat, Mirror Image
•
If the Cover/Sheet Insertion mode is used with the Automatic Paper Selection mode, Auto Orientation is
not performed.
•
You cannot select the Cover/Sheet Insertion mode when the Different Size Originals mode is set with
the Automatic Paper Selection mode.
•
If you select the Staple mode when the optional Finisher-S1 is attached, you cannot staple more than 30
sheets of A3 or A4R paper, or 50 sheets of A4 paper, including sheet insertions.
NOTE
•
The Cover/Sheet Insertion mode is available for the Copying function only.
•
If you are copying on the front cover, back cover, or sheet insertions, these sheets are included in the
count of the total number of copies made. If these sheets are left blank, however, the machine's counter
does not count them as copies.
•
If you are adding chapter pages, these sheets are included in the count of the total number of copies
made, since chapter pages are always copied on.
■ Front Cover
This setting adds a front cover sheet to each set of copies. You may also copy on the front cover sheet.
Originals
Copies
Printed
Front Cover
To Next Page
Loading...
Need help?
General
