Shooting Still Images
15
Getting Started
5. Without changing anything else, press the shutter
button all the way (press fully) to shoot.
• The shutter sound will play once and the image will record.
• Recorded images are displayed on the LCD monitor for
approximately 2 seconds immediately after shooting (Rec.
review). Shooting is possible while the image is displayed.
• Holding down the shutter button after taking a shot will continue
displaying the image.
• The indicator will blink green and the file will record to the
memory card.
To Shoot Images in Focus
The camera automatically sets the focus when you press the shutter
button halfway*.
* The shutter button has a two-stage action. Pressing it down to the first stage is
referred as “pressing halfway”.
Mute Setting
Pressing the DISP. button while turning on the camera power will
silence all camera sounds except for warning sounds. Setting can be
changed from the
(Set up) Menu [Mute].
Press
halfway to
focus
Press fully
Just pressing
fully
Beeps
twice
AF frames will display in
green on the LCD monitor
at the points of focus.
Incorrect
Correct
Recording:
blinks green
Shooting Preparations
Complete: lights green
(Orange when the flash fires)
To Next Page
Loading...
Need help?
General
