Canon LV-7370 User Manual

9
. Projectng an Image (Basc Operaton)
1
2
4
3



Adjusting the Tilt Foot
1. Lift the front edge of the projector.
CAUTION:
Do not try to touch the ventilation outlet during Tilt Foot adjustment
as it can become heated while the projector is turned on and during
its cool down period after it is turned off.
2. Push straight up and hold the Adjustable Tilt Foot Lever on the
front of the projector to extend the adjustable tilt foot.
3. Lower the front of the projector to the desired height.
4. Release the Adjustable Tilt Foot Lever to lock the Adjustable tilt
foot.
 
 

 


CAUTION:
• Do not use the tilt-foot for purposes other than originally intended.
Misuses such as using the tilt foot to carry or hang (from the wall
or ceiling) the projector can cause damage to the projector.
Adjustng the left and rght tlt of an mage [Rear foot]
1. Remove the spacer (black rubber) from the rear foot.
 

2. Rotate the rear foot.
 

NOTE:
• Do not extend the rear foot beyond its height limit (0.4 inch/10 mm). Doing
so may cause the rear foot to come out of the projector.
• After using the projector, attach the spacer to the rear foot.



Up
Down

Canon LV-7370 Specifications

General

Brand	Canon
Model	LV-7370
Category	Projector
Language	English