This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and
Information System Industries Association). This projector supports all commands defined by PJLink
Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the user’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
The supplied filter cover is designed for
preventing dust accumulation on the filter when
mounting the projector on the ceiling.
Filter
Cover
(supplied)
Projector
For attaching the filter cover to the projector,
push the cover as the picture shown. (For
removing the filter cover, push the cover to
the opposite direction.)
Turn over the projector.
1
3
Attach the projector to the ceiling mount in
accordance with the instruction manuals
which come with the ceiling mount.
4
2
Before attaching the filter cover to the
projector, removing the filter cover (bottom)
first. See page 61 for removing.
- Please keep the filter cover (bottom) for later use.
- If the LV-CL16 Projector Attachment is applied, the supplied filter cover is unnecessary.
Projector Input PJLink Input Parameter
COMPUTER 1 ANALOG PC RGB 1 11
COMPONENT VIDEO 2 22
SCART RGB 2 12
COMPUTER 2 ANALOG PC RGB 3 13
VIDEO VIDEO VIDEO 1 21
S-VIDEO S-VIDEO VIDEO 5 25
To Next Page
Loading...
Need help?
General
