Note
• If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
To check the current printer settings or to apply the printer settings to the printer driver, display the
Quick Setup tab, click Printer Media Information..., and specify the settings in the dialog box that
appears.
For details about the paper information to be registered on the printer, see the following:
• Paper Settings on the Printer Driver and the Printer (Media Type)
• Paper Settings on the Printer Driver and the Printer (Paper Size)
Checking Printer Settings and Applying Settings to Printer Driver
1.
Open printer driver setup window
2.
On Quick Setup tab, click Printer Media Information...
The Printer Media Information dialog box appears.
3.
Select Paper Source
From Paper Source, check the setting or select a new paper source.
The current printer settings appear in Media Type and Page Size.
4.
Apply settings
To apply the printer settings to the printer driver, click Set.
Note
•
If the media type on the printer is set to Hagaki, Ink Jet Hagaki, or Hagaki K, or if the output
paper size on the printer is set to 2L/5"x7"(13x18), click Set to display the dialog box.
Select the media type and paper size that match your purpose, and then click OK.
• If the media type and the output paper size are not set on the printer, Set will be grayed out and
cannot be clicked.
• If communication with the printer is disabled, the Printer Media Information... dialog box will
not appear or the printer driver will not be able to obtain printer media information.
177
To Next Page
Loading...
Need help?
General
