Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink
tank whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper.
After closing the feed slot cover, the paper information registration screen is displayed on the LCD.
Select A4 or Letter for Page size and Plain paper for Type, then select Register.
If a message is displayed on the LCD, follow the directions in the message to complete registration.
3.
Open the operation panel, then pull out the paper output tray.
4.
Select Setup on the HOME screen.
LCD and Operation Panel
The setup menu screen will appear.
5. Select Maintenance.
The Maintenance screen will appear.
6. Select Print nozzle check pattern.
73
To Next Page
Loading...
Need help?
General
