Canon PIXMA TS5300 Series User Manual

Scanning in Basic Mode
Use the Basic Mode tab to scan easily by following these simple on-screen steps.
To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time
with ScanGear (Scanner Driver).
When scanning from the ADF (Auto Document Feeder), preview is not available.
Important
• The following types of documents may not be scanned correctly. In that case, click (Thumbnail)
on the Toolbar to switch to whole image view and scan.
Photos with a whitish background
Documents printed on white paper, hand-written text, business cards, and other unclear
documents
Thin documents
Thick documents
• The following types of documents cannot be scanned correctly.
Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to irregular shapes
Note
• Both sides of a two sided document can be scanned simultaneously on models with ADF duplex
scanning support.
1.
Place document on machine's Platen or ADF, and then start ScanGear (scanner driver).
Positioning Originals (Scanning from Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source to match your document.
316

Canon PIXMA TS5300 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Connectivity	Wi-Fi, USB
Supported Paper Sizes	A4, A5, B5, LTR, LGL, Envelopes (DL, COM10)
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Interface Type	USB, Wi-Fi
Mobile Printing	AirPrint, Mopria
Paper Types	Plain Paper, Photo paper, Envelopes, Matte Photo Paper
Maximum Paper Input	100 sheets