Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Software Starter Guide

Windows/Macintosh
109
PowerShot A80
How to Connect the Camera to a Computer and Prepare to Transfer Data
1 Attach the supplied USB cable to the computer’s USB port and the
camera’s Digital terminal as shown below.
2 Set the mode switch to the playback mode and turn the camera’s
power on. This will prepare the camera to exchange data with the
computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 88) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
All programs and features are supported.
USB Port
USB Cable
1. Open the terminal cover by slipping a
fingernail under the tab.
2. Insert it all the way until it clicks.
To the Digital
Terminal

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English